Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Electrical & Wiring (http://www.gasgasrider.org/forum/forumdisplay.php?f=19)
-   -   2018 XC 300 charging voltage (http://www.gasgasrider.org/forum/showthread.php?t=24096)

Wypipo 12-02-2018 06:49 PM

2018 XC 300 charging voltage
 
What voltage is the battery supposed to charge at while the bike is running?
I just put some dielectric grease in all of my electrical connections, now with the bike running my battery reads 13.12 and climbs very slowly. I thought it should be a higher voltage with the bike running and stator charging the battery?

Neil E. 12-03-2018 11:06 AM

The resting voltage for a lithium battery is ~13 V. Perhaps your battery is already sufficiently charged. My voltage when running at moderate revs is usually 14-14.5 V.

Maybe the grease is reducing electrical contact along the way if a connection is not totally firm.

Wuzofoz 12-06-2018 12:36 AM

The manual says 14.2v. Saying that my 2018 gp250 dose not charge over 13.5v and reads lower when running if battery charge is down

gasgasman 12-06-2018 06:45 AM

Try another volt meter.


All times are GMT -5. The time now is 12:02 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org