Machining Stock Clamps for KYB forks
For those that have machined the stock 45 mm clamps to fit the 48 mm KYB forks have any problem arisen? I'm having a spare set machined and want to make sure I'm not risking having them break while riding.
Thanks Dan |
I have machined one with 3 years trouble free trail riding
|
All times are GMT -5. The time now is 04:00 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org