Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   General Discussions & Announcements (http://www.gasgasrider.org/forum/forumdisplay.php?f=7)
-   -   GG ec300 - too small (http://www.gasgasrider.org/forum/showthread.php?t=8900)

Richard 02-15-2011 05:00 AM

GG ec300 - too small
 
Hi, I am looking to buy an EC 300 05 for my first bike :). I am 6'4" and 90kgs without gear. I have heard (from the internet...) that the ergo's are small. I have found one with raised bars, but will it be too small for my lanky frame?

Soon to be Gasser.

husley 02-15-2011 06:41 AM

Me too
 
I just got my first GG a month ago, 2010 300.

I am 6 2' and I stand 90% of the time (I'm a trials guy).

Stock the bike was a bit cramped, I raised the bars 1" and it is almost right. I'm going to do the peg mod today and hopefully it will be perfect.

J

Bobt250 02-15-2011 07:18 AM

I don't think the difference in ergos between the GG and anything else is noticeable enough to change a decision on buying one. I think it seems small because there is no tank in front of you. It's perhaps a bit of an illusion.

bukwheat 02-15-2011 07:46 AM

Quote:

Originally Posted by Bobt250 (Post 57440)
I don't think the difference in ergos between the GG and anything else is noticeable enough to change a decision on buying one. I think it seems small because there is no tank in front of you. It's perhaps a bit of an illusion.

I agree, its probably no more than a couple of millimeters one way or the other. And at 6'4", there probably isn't a bike made that wouldn't feel a little cramped to you....you could always go for the leg reduction procedure but thats a bit extreme...:D:rolleyes:

HuskyDude 02-15-2011 08:59 AM

Having a Husky and a Gas Gas. I can say the Husky is a larger frame bike about an inch everywhere. Try one if you get a chance. I'm 6' and thought the larger Husky frame was pretty good. But when I bought my Gas Gas I never really got that cramped small feeling you get while on some other bikes. One thing I had to do with the Husky is add over an inch under the bars to get it to feel right while standing. Although the Gasser was a smaller frame I haven't added anything under the bars...The ergos are just right for me.

DRZMC 02-15-2011 09:17 AM

Hi I am also 6' 4" and my nephew is 6' 7" I have a 07 250 and my nephew has my old 03 250. All I did to these bike's was change the tripple clamp so I could adjust the bars forward.And put the Moose foot pegs on that lower the pegs down and back a 1/2 inch.Cant say that I feel cramped but then I have been on a GasGas since 06 so it feels perfect to me.Now if you want to feel cramped try out a 1987 XR 250.

waycrazy 02-15-2011 11:13 AM

I am 6' and don't feel cramped on my EC300 . All though a taller seat is in the works.

Richard 02-15-2011 08:05 PM

Thank you
 
Thank you for your replies... Didn't expect so many so soon. This is a great forum and encourages me to get the gas gas even more!!

john01 02-15-2011 09:10 PM

Richard get one you can make them roomier with a tall seat, slightly lower pegs, and higher bars in the forward position. They are more than worth the personal set up cost. BTW you are right this is a great forum, welcome.

bukwheat 02-16-2011 07:25 AM

just a little enticement...
 
Here is a pic of mine with a tall seat installed....
http://www.gasgasrider.org/forum/pic...6&pictureid=49


All times are GMT -5. The time now is 12:57 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org