Foot pegs
I have a 2005 ec 300 that needs new pegs.
Are they a gasgas specific item or are they the same as other brands ? |
I run Pivot Pegz on my 2010 model but they were on my 2005 model before I sold it. The Pivot Pegz site shows that the same pegs fit on:
Gas Gas 1999-2014 EC, XC, MX, EC FSE All Capacities Kawasaki 1997-2004 KX 125-250 Kawasaki 2005-2008 KX 125 Kawasaki 2004 KXF 250 Suzuki 2003-2008 RM 125-250 Suzuki 2004 RMZ 250 Hope this helps a bit. |
Yamaha pegs will fit the Gasgas
Sent fra min E5603 via Tapatalk |
IMS Yamaha pegs fit
|
2010 and later YZ 5XC pegs are wider and made from Titanium so you can save a little weight.
5XE pegs are similar to stock GG pegs but made from Titanium. http://www.thumpertalk.com/topic/790...footpegs-pegs/ |
I have YZ/YZF Pivot pegs fitted to my 02EC300.
|
Note that you will need to mod the RHS peg (if you go with other brands) to alow space for the brake pedal when the pegs fold up.
It involves a fair amount of grind and can get costly if not done properly, I initially didn't grind off enough of the Fastway pegs and the pegs hit a rock fairly hard forced the brake internals out of the brake mc I eventually had to get a new mc as the circlip groove rounded and the internals kept falling out every time there was any sort of upward contact to the lever |
Also pegs from
1999-2016 YZ 250 will fit. |
3 Attachment(s)
I recently replaced the foot pegs on my 2004 EC300, I was surprised how expensive they were...then I saw this Stainless Steel set on eBay, from China for only 15 euros including postage!! :eek:
I thought I'd give them a go, I had to wait 2 weeks for delivery, but when they arrived I was pleased with the quality. I've been using them for a few months now and I'm very happy with them, no complaints, especially for the price! :) Attachment 7798 Attachment 7800 Attachment 7799 If anyone decides to buy similar, be careful to check the diameter/length of the mounting hole and pin...I didn't and I had to drill/enlarge the mounting hole in the pegs, other than that they were a perfect fit! |
All times are GMT -5. The time now is 10:56 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org