Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)

- Enduro Chassis & Body (http://www.gasgasrider.org/forum/forumdisplay.php?f=20)

- - brakes (http://www.gasgasrider.org/forum/showthread.php?t=24272)

masterbill

02-19-2019 10:24 AM

brakes

Hello,
This is the front caliper off my 2007 Ec300.

I have haven't seen this set up before!!

Had a chat with Gas Gas Uk and they had never seen one like this !

[IMG]https://i29.photobucket.com/albums/c...psmeknkgnz.jpg[/IMG]
http://i29.photobucket.com/albums/c2...psiwjwbp5j.jpg

(F5)	02-19-2019 11:57 AM

You been riding in the salt pits?
XR400 caliper is the same but use std mount. Pins are replaceable.

masterbill

02-19-2019 12:08 PM

Bike has had a hard life, undergoing a full rebuild at present. New pins ,pads etc .

I have never this piston style set up before.

Brakes worked well - I din't hit anything !!

RBrider

02-20-2019 03:36 AM

Quote:

Originally Posted by masterbill (Post 188672)

Bike has had a hard life, undergoing a full rebuild at present. New pins ,pads etc .

I have never this piston style set up before.

Brakes worked well - I din't hit anything !!

Order new pistons, too.

RB

masterbill

02-20-2019 12:44 PM

Got seals and pistons coming :)

Thompo

02-21-2019 06:45 AM

Had the same on my mates 2006 200 front caliper.

Pistons are made of plastic with the metal caps.

One of his was scored and weeped fluid under pressure. Popped it out and replaced with a metal piston 22 or 25mm iirc

masterbill

02-21-2019 07:07 AM

Thanks for that info 😉

All times are GMT -5. The time now is 10:51 AM.