Part out. 07 EC 250 (Aus)
 

The bottom end has gone & the vibration has ovalized all of the engine mounts in the cases. I was going to do a full resto but I put a deposit on a Beta...

Its missing the side stand, overflow bottle & all of the ADR stuff
All prices are + post.

Frame is bent on the down tube. (probably going to be a wall ornament) make an offer???
Swing arm has a small gouge from the master cylinder bending in and rubbing 95% good. $50sold
Left and right cases have ovalized engine mounts from vibration but Id like to sell the complete bottom end with the gear box (gear box 100% good), clutch & ignition. $200 ono
Subframe about 90% straight. $120 sold
Kick start lever. $10 sold
Rear wheel complete with tire has a small crack (no sproket or disk rotor). $40 Sold
Front wheel (no Tire or disk rotor). $40 sold
Check point power valve cover. $40sold
250 cylinder. $100
Cylinder head. $50
Force radiator guards missing bolts. $30
Clutch lever, hose and slave. Sold
White front fender (09 shape). $20
48mm upper and lower tripe clamps. $40


New parts list:
GPI Radiators & red hoses in box. $80
TM Designs red chain slider & guide, never fitted. $100 for both
Rear white fender $30 sold

Near new:
Topline seat cover, black with red gripper stripes (complete seat) $80 sold
No Toil air filters x 2 $30sold
Twin air, air box wash cover $20sold

more updates to come

do you have a clutch master and slave cylinder? what condition is it in?

John

With those very reasonable prices your parts should sell quickly.

Yes. It in good working order. I removed the master cylinder quite awhile a go because I use a clake LHRB.

$20 for both plus post

Cheers Zman. I hope so, otherwise they will collect dust.

send me your paypal info.

John

PM me your name and address and I'll get you a total price. Cheers Matty

Parts -
 

Hey Tomac, My EC250 is '06 (I think... 10th character of VIN is "G"). I'm looking f?r a straight exp. chamber and rear guard support loop. Anything there?

I think the expansion chamber will fit but lm not 100% sure, if so its in very good condition. Rear guard loop??? Do you mean the sub frame?

Could you please post or pm me a cpl pics of pipe? Also, the guard loop I refer to is like a U shaped alloy tube which bolts to rear if subframe underneath rear guard. I assume it's there to support weight of taillight :-)