Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Intake/Carburetion - 2 stroke (http://www.gasgasrider.org/forum/forumdisplay.php?f=15)
-   -   01 gasgas 250 ec jetting help (http://www.gasgasrider.org/forum/showthread.php?t=25056)

acmetrapper62 03-23-2020 11:23 AM

01 gasgas 250 ec jetting help
 
I have 01 gasgas 250 ec. I ride at around 1,500 feet ruffly. With 50:1 93 octane mix gas . It used to be 32 :1 and I want to change it to 50:1. The needle that was in it before was nozf with a 38 pilot and I could not read the other number for main jet. I have a needle laying around n1ef idk if it good for my bike or what jets to use with that needle . I just need some advise on what jet to go with the n1ef needle with 93 octane fuel 50:1 br8eg plug 1,500 feet

hannesd 03-23-2020 12:42 PM

have a look in the local jetting database.
look for the same bike, same altitude and se what they did and rear the comments on their setting.
http://www.gasgasrider.org/forum/sho...tting+database

Zman 03-23-2020 07:44 PM

According to older posts the n1ef is similar to a n1eg which works very well for GG bikes. You will find lots of info on both needles.

frankinberg 03-23-2020 08:21 PM

I have had gasgas sense 1998 we always run ltr needle which is a ddk needle worked great in a air Stryker 1 round top 172 Maine 42 pilot ddk needle 2 nod from top it will rip


All times are GMT -5. The time now is 09:01 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org