Battery install (need for roadbook) EC250 2011
 

Hello guys! First of all, sorry for my not so good english. Brazilian here.
Well, coming here because i need some help to install a battery on my GG EC250 2011 (2strokes). The fact: i need to feed a small 12v electrical engine for a Roadbook (to follow directions, instructions on a enduro race).
I found a place to put the battery (on the air box), but wich ones to charge the battery when im using?
Thanks!

Solved!
 

After some research, removed the original regulator/rectifier and installed a regulator/rectifier from a Honda 125 4 strokes. From the stator use the white and yellow wires in this regulator/rectifier. From the regulator, one black to the ground and the red to the battery. Everything fine. 14v on the fly. Placed the battery with some bolts in the under the seat.

Very nice! Let us know how well it works, but update if run into a trouble spot...and how you solve it. I know this subject comes up occasionally.

Bowhunter007 works ok. Sorry for the delay in the answer. Now my new bike come with e-start

Enviado de meu SM-N910C usando Tapatalk