Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Engine - 2 stroke (http://www.gasgasrider.org/forum/forumdisplay.php?f=37)
-   -   Crank Remover and Crank Installer tools for EC250 (http://www.gasgasrider.org/forum/showthread.php?t=15297)

Fabry 06-25-2013 11:12 AM

Crank Remover and Crank Installer tools for EC250
 
Can anybody please point me to some good Crank Remover/installer tools that works with Gas Gas 2 strokes?

Jakobi 06-25-2013 12:06 PM

Tusk (rmatv) sells one, however I never required one when I did my bottom end. The cases split easy enough (once all the bolts are out). If the crank doesn't come out a few taps with a plastic/rubber mallet moves it easy enough. For installation I simply froze the crank with some dry ice and it dropped right in.

pscook 06-25-2013 12:07 PM

I didn't have to use any install tools, are you having issues? I know that motion Pro makes a very nice press and puller, they are affordable and pretty stout. But, again, I haven't had any issues installing a crank into the bearings if you freeze everything before installation.

Fabry 06-25-2013 03:37 PM

Quote:

Originally Posted by pscook (Post 114795)
I didn't have to use any install tools, are you having issues? .......

I didn't start the job yet I'll like to line up with all I need (or may need) before start, this is only my second Crank rebuild i did an old XR250 once and it wasn't easy...
Thanks for the tips.

pscook 06-25-2013 06:36 PM

Check out Jakobi's rebuild thread here, he sorted everything out pretty well (two or three times in places :D).

Jakobi 06-25-2013 07:24 PM

True that! That was my first ever bottom end. Learnt a few things.. Next one will be a walk in the park.


All times are GMT -5. The time now is 07:46 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org