Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Suspension (http://www.gasgasrider.org/forum/forumdisplay.php?f=16)
-   -   2013 suspension (http://www.gasgasrider.org/forum/showthread.php?t=13747)

nickp 11-23-2012 01:34 PM

2013 suspension
 
2013 gas gas 250ec,marzocchi/sachs. static sag 35mm rider sag 98mm am i anywhere near, any imformation much appreciated.many thanks.(uk bike).

v-tec 11-23-2012 02:04 PM

Quote:

Originally Posted by nickp (Post 99482)
2013 gas gas 250ec,marzocchi/sachs. static sag 35mm rider sag 98mm am i anywhere near, any imformation much appreciated.many thanks.(uk bike).

Hi nickp,
You are close, normally i set static @25-30 and look for a race sag of 100-105

But that would be with all my kit on and 1/2 tank of fuel,
This would be done when in the standing on the pegs position,

If thats how you have done it i would say your spring is just a little hard,But as its a new bike have you been out on it to give it a shake down, as they do give a little,
Dont get to hung up on the settings, Hope this helps,
Where are you in the UK

V-tec

a c t i v e X 04-23-2013 03:22 PM

onto thi topic of 2013 EC with Sachs/Zocks
 
Hi guys
how does this combination of 2013 EC feels? (the Zocks 45 compared to Sachs 48)
sold my 2011 250E and checking on 2013
in general, beside of ground clearance and looks, accessories and parts, how is the dynamic feeling and suspension feels?


All times are GMT -5. The time now is 01:24 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org