Pilot jet question AS1
Getting back into riding after 10 years off. I have a new to me 2010 EC300. Air screw has no effect, can turn it all the way in still runs. Is this too rich needing a smaller pilot jet? Thanks,
Trailrider |
Have a search for jetting threads matey. More than likely float height is too high and it still has the standard rubbish needle. N3EG works well in them.
|
Or RM250 NEDJ. Put one in a mates 10. He was sceptical but now won't shut up about how much difference it made. Try clip 2 from top.
|
Quote:
|
Pilot jet question AS!
Thanks for the help guys. I will check the float level along with the pilot jet.
|
Good point Nate. His 10 had as AS2 (top held on by screws). It was supposedly a 6Days but I have heard the transition from AS1 to AS2 wasnt clear between markets.
|
Quote:
I can't overstate this step. Spend the $20 on a needle , which depending on which style carb you have. |
Quote:
. |
Quote:
|
Probably Keihin ship them all with this unless you pay the $43 document fee to change the needle type.
|
All times are GMT -5. The time now is 02:52 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org