2010 Partial Part Out - Seeking interest
 

Hello everyone,

I'm having a bit of a spring clean and considering partially parting out my 2010 and keeping a few items as spares for my 13. Seeking interest to see if it'll be worth my while, given that I'm in Australia and postage will be up for people overseas. Our dollar is down at the moment which may negate some postage costs though.

I'd basically be looking at holding onto parts I can exchange between bikes, so the engine, reeds, wheels, and possibly forks and radiators.

In terms of what would be up for sale.
Near new plastics, 2011 Cervantez sticker kits.. Brand new headlight/shroud still not used.
Torn up seat, but have an as new gutz cover I'd be able to sell with it.
Fuel tank, small crack at upper mount. Not impacting seal of tank.
Pipe is a different fit so would be for sale. Could include P3 cover.
FMF Core Turbine II silencer. Needs a repack.
Ohlins 888 Shock
Ohlins TTX Shock
Linkages
Frame has seen some use
Triple clamps
Airbox, also seen some use. Pretty flogged out
PWK AS2 Carby
Swingarm
Brakes front and rear. Lines showing some wear. Bit of slop in rear caliper.
Plus all the other bits I've forgot.. airboot, electrics, switch blocks, subframe, etc. If there's anything in particular let me know.

Not sure what I'd even ask at this stage for the bits and pieces.

I would take the plastic and the ttx Shock let me know

If I can get enough interest to part out I'll let you know.. Otherwise may be interested in moving the TTX shock. I have 2 x springs available for it too 5.4kg/mm and 5.6kg/mm.

If the plastics are spoken for, I'm interested in the pipe with P3 and the sticker kit, thanks! And maybe the kickstand, especially the bracket (I broke one this year already).

I guess I thought the Stiickers were on the plastic

They are

Remember I'm in Australia so the cost of sending large packages internationally could end up pushing the price well beyond what it's worth too.

Is the seat a std one or tall?
Id be interested in seat and cover if its tall soft

Standard height. Standard density. Foam supplied by gutz. Possibly a bit firmer than OEM. Still have the stock foam too. Both have worn some in the knee areas.

I need a shift lever if you have one.