Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)

- Enduro Other... (http://www.gasgasrider.org/forum/forumdisplay.php?f=21)

- - BTSL seal (http://www.gasgasrider.org/forum/showthread.php?t=21962)

stian

10-06-2016 10:49 AM

BTSL seal

Have a 05 250exc with bad crank seals. The standard part has a BTSL ending that I cannot find in my local bearingshop.

Does anyone know if a identical BA, BASL, B1 seal does the same?

gasser

10-06-2016 12:10 PM

Quote:

Originally Posted by stian (Post 171765)

Have a 05 250exc with bad crank seals. The standard part has a BTSL ending that I cannot find in my local bearingshop.

Does anyone know if a identical BA, BASL, B1 seal does the same?

The letters at the end of a bearing part number refer to the type of seal that bearing has. I would guess that "SL" at the end of your part number is an abbreviation for "single lip" meaning that it has only one contact point with the crank.

stian

10-07-2016 04:49 AM

Quote:

Originally Posted by gasser (Post 171770)

I am familier with the combination of the seals listed, but the T in btsl puts me a bit of.

All times are GMT -5. The time now is 05:52 AM.