Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Electrical & Wiring (http://www.gasgasrider.org/forum/forumdisplay.php?f=19)
-   -   Trail Tech Speedo on EC200 or 2T (http://www.gasgasrider.org/forum/showthread.php?t=2165)

warnzie 02-06-2008 12:34 AM

Trail Tech Speedo on EC200 or 2T
 
Hi everyone, well i think my speedo has packed it in. I have a 04 EC 200 with only 500k on it and even with a battery in it (the speedo unit) when i start the bike i get nothing on my speedo? Does the speedo unit need a battery to operate speedo when bike is going? So, im guessing my speedo is dead. Please correct me if i am wrong? So just wondering if anyone is using a trail tech speedo unit. How do go about wiring existing blinkers ect to unit as these currently feed into stock speedo unit. Also any experiences?

Thanks

Nathan

Bearman 02-06-2008 12:40 AM

I have a trail rech speedo on my '03 200. It is the Endurance model. I have the stock speedo but have not used it, the previous owner had the same model trail tech speedo on it and he reckons its much better. Havent had to wire blinkers up to mine though so i cant help you there. dont think you can with the Endurance model

eff 02-06-2008 06:49 AM

I have a Trail Tech Vector on my '04. The sensor threads right into the existing hole in the brake carrier. I ordered the KTM OEM model, 85-101. It has the wrong temp sensor, but I don't use it.

If you want a full dashboard with indicator lights check this out: http://www.trailtech.net/motorcycle_...ashboards.html

dlwheaton06 02-06-2008 06:53 PM

Help!
 
I bought a computer off e-bay real cheap and want to install it on a 01-200-ec can anyone tell me whats needed to hook it up. the unit says gg on face and has a set button mode button, head light and turn signal light. it has a number on back below battery ,pp-15gf and below that be250334045 I have little to no GG reps in my area and of course crossing paths with some who has knowledge of GG. Thank god for this site. Don

eff 02-07-2008 06:54 AM

Assuming all you want is the speedo to work, then all you need is a sensor w/wire and plug it in. Of course a good battery is required.

dlwheaton06 02-07-2008 06:14 PM

ec 200
 
Thank you, Don

Skidad 02-07-2008 07:37 PM

Seems Gas Gas uses the Trail Tech Vapor (branded with Gas Gas and in red) on 08's for their OEM speedo now after looking at this pic. Add the dashboard with the indicator lights that eff linked to and your all set.

http://www.gasgasrider.org/gallery/d..._300EC_002.jpg


Skidad in MA


All times are GMT -5. The time now is 06:20 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org