Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Electrical & Wiring (http://www.gasgasrider.org/forum/forumdisplay.php?f=19)
-   -   Dual Map switch.. (http://www.gasgasrider.org/forum/showthread.php?t=6703)

stevehipkiss 01-24-2010 11:24 AM

Dual Map switch..
 
Have a 2005 ec300 in uk...have fitted a switch to my bars connected to the wires from the cdi unit...which I am told adjusts the powercurve..

Q. Have has it on the bike now for about a 12month, but cant seem to see any difference..Tested switch and one position current flows, the other position no current....How does this switch/current flow work ? :confused: :(

How much difference should I be seeing/noticing ? :rolleyes:

WHat do you lads think of your swithes ???

wence 01-24-2010 12:29 PM

:) I have an 07 EC300 and it has a switch. The only time you notice it is when it is jetted correctly and you are low in the revs and accelerating. It is a fair bit snappier off the bottom and when you blip the throttle on the sun mode.
Cheers Mark

geraldh 01-25-2010 01:26 AM

I have an 06 ec300 the snow/mud setting just seems to hold the bike out of the Power band for a little longer...:eek:

stevehipkiss 01-28-2010 01:29 PM

Cheers Gents,
I think Ive at last seen the difference today, as mentioned in both the above replies...


All times are GMT -5. The time now is 09:02 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org