Trail Tech bike computer
 

Hey Guys,

I bought a Trail Tech bike computer from Gofasters and just got around to trying to install it. I was wondering if someone who has this computer can post a pic of exactly how the sensor is mounted to the caliper. The instructions show it on japanese and KTM's, and I have an idea how I want to do it....just wanted to see a pic of someone elses work before I drill.

This is the last thing I have to do to my 03 200 and I'll post some before and after pics.

Thanks!
Sam

Put down the drill and back away from the motorcycle. :D

The caliper comes stock pre drilled and threaded for a sensor. I don't have a pic handy but with a little inspection of the caliper you will see it.

Roscoe

Trail Tech
 

I have it installed on my 2000 xc 250 and can take and send you a picture if still needed. Just let me know.
j-loza@umn.edu

Hmmm ok im feeling like kinda a dummy but I cant find any predrilled hole that is the right size. Here is a pic of my caliper maybe it is not the stock one?

http://www.flickr.com/photos/30164261@N04/2824681603/

I guess I need a lesson on how to get pictures in my threads too haha, anyway here is a link

http://www.flickr.com/photos/30164261@N04/2824681603/

What is that stuck in the hole just above the lower mount? That look like where mine is mounted:
http://www.gasgasrider.org/gallery//...cat=&ppuser=28

its some kind of broken plastic part that was in there when I bought it....I'm guessing maybe it was from some kind of disc guard the previous owner had?

Sam

You may want to try and remove it carefully. I think that is your sensor hole.

probably the original cable,try to get it out gently,maybe you can thread a sheet metal screw into the plastic and help back it out,may want to gently heat that area a little,might help it loosen up

sammy,
The stock GG sensor is plastic. I put a Vapor on my 04 300, but I used the stock sensor, I never removed it from the caliper.
The supplied sensor from trail tech is way too short to reach through the GG caliper. I have pictures, but can't, for some reason attach them. I take it your bike did not have a stock speedo set up?
My 03 has the old style round speedo, the pickup point is on the rear caliper.

Mike.