Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Suspension (http://www.gasgasrider.org/forum/forumdisplay.php?f=16)
-   -   2018+ Front Fork Guard Rubbing issue (http://www.gasgasrider.org/forum/showthread.php?t=24403)

Booki 04-14-2019 05:59 AM

2018+ Front Fork Guard Rubbing issue
 
3 Attachment(s)
I have a 2018 EC300 and it has been pointed out to me that there is an issue with the front fork guards rubbing against the forks.

This may go unnoticed for quite some time, so please check your forks closely near the clip. I have 300km on my bike and the clip has some wear on it.

One of the facebook groups I am a member of brought this to my attention and Sean has made up some protectors.

https://www.facebook.com/seangriff

Just thought I would bring this up for other users before its too late!

swazi_matt 04-14-2019 04:28 PM

Being kyb you could also get some of the mud scrapers from skf to do the same (for those not based off n the UK) (or just keep an eye on it- the steel clip is there as a wear item)

Jakobi 04-14-2019 07:35 PM

Quote:

Originally Posted by swazi_matt (Post 189658)
Being kyb you could also get some of the mud scrapers from skf to do the same (for those not based off n the UK) (or just keep an eye on it- the steel clip is there as a wear item)

Yes.. it's not just a KYB issue either.

Zip ties cost less than new clips, and much less than SKF.

Booki 04-14-2019 09:38 PM

From a quick look, the steel clip do anything other then provide a buffer from the fork guard...So yes, I guess a zip tie would be fine if you remove the clip?

shawbagga 04-15-2019 12:18 AM

Quote:

Originally Posted by Booki (Post 189664)
From a quick look, the steel clip do anything other then provide a buffer from the fork guard...So yes, I guess a zip tie would be fine if you remove the clip?

Nah mate ya just run a thick zip tie above the clip.

rvktm 04-22-2019 08:48 PM

the wp 48 plastic bush / sleeve fits kyb and marzocchi 48 mm i used a heat gun to get them on only about a fiver uk for two from ktm


All times are GMT -5. The time now is 11:15 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org