Quote:
Sent u an email with a pic J |
Quote:
Can I get a picture of your plastic set? I'm quite interested in both. Steel subframe is subject to rust quite easily. |
Quote:
It is aluminum. Plastic pics coming later today. Or I can text them now J |
Quote:
J |
Would you sell me the upper triple clamp only? I might need one to bore out to fit KYB forks if I ever need to do a conversion. Right now I'm quite happy with my Marzocchi PFP 48, but some of them has been eaten up from the inside...
I could also take the Motion pro throttle cable if its the type with the threaded ends. I use one on my Lectron now, but a spare is always handy. |
UPDATED 8 26 16
Engine minus Stator and Flywheel (top end, bottom end, reeds) Able to provide video of the engine running just prior to part-out. $800 SOLD Pipe OEM. One very small dent-can send pics. The pipe was dented prior to my adding a P3 when I got the bike. $100 SOLD Sachs Shock. Sprung for 200lb rider weight. Valved for rocks/very soft. 0.5hrs since servicing. $100 Triple Clamps $75 SOLDFMF Turbine Core 09 200. Same part # stamped on the Silencer as my 300 $80 Wheels 09 200. $300. One dent to rear rim. OEM Plastics 09 200. In "ok" condition. Plastics are really good, OEM graphics pealing up in a couple spots. $70 SOLD Scorpion Rad Guards $75 SOLD- OEM Radiators. In good condition. Straight. Inner-most column slightly compressed. No leaks. Rads were compressed when it was a demo. $100 Front Brake complete with lever $150 SOLD Aluminum Skid Plate (gasgas) $40 Rear Brake complete with lever $150 Clutch complete, MC, Slave, Lever and Line $100 SOLD OEM Tank with Cap and Petcock. Some discoloration $75 Carb OEM. Jets, Needle, Cable not included $150 OEM Throttle Cable $15 Motion Pro +3" Throttle Cable $15 Subframe (metal portion only, no plastic/airbox etc) 09 200 $150 SOLD-Frame with Title $200. Had the kickstand/roller bracket re-welded when it cracked off in 2013. Swingarm- has defect where a bolt that was too long (installed by yours truly) wore into the material $50 Front/Rear Axles $40 SOLD CDI $40 Airbox 09 200 $ 20 Seat, no tears/normal wear $50 SOLD Full Linkage-new bearings. $100 GPR Sub-Mount kit (including collar and post). Stabilizer not included $50 OEM Chain Guide $10 SOLD-MAP Switch $10 SOLD OEM Bar Mounts $10 Bucket of Bolts. 75% of the bolts, nuts, fasteners, etc. Basically all the bits left-over after the part-out $40 OEM Handguards/Plastic Deflectors (removed at 5hrs) $5 SOLD OEM Wiring Harness $50 This will take a few extra days as I will have to remove the Sicass portions. SOLD Sachs Forks-Red with hard-mounted Motion Pro Bleeders. $ make an offer. Selling to be used for parts, not to be ridden. In fact I may disassemble prior to shipping. Sicass Dual-Sport Lighting Kit. I might consider selling this (also considering putting it on my 200). __________________ |
What about the rear shock? I need one for my 2010 ec300. Thanks and aloha
|
Quote:
|
Day late dollar short lol
|
Did the pegs get sold with the frame?
|
All times are GMT -5. The time now is 12:55 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org