Rebound Adjuster knobs? 45mm Sachs
 

I have a 2011 EC 300, I beleive it has 45mm Sachs. I really miss the on the fly rebound knobs my KTMs had, I'm very picky about rebound and will often change it during transfer sections especially if i know we are going from a rocky section into a sandy section. Anyone know of any knobs that will work so I can skip the screwdriver? The screws are a pain to get to with my Flexx bars.

Something like this may work.
http://www.ride-engineering.com/prod...p?p=c&s=5&e=10

http://www.ride-engineering.com/imag...X-CAS48-RA.jpg

Or a cheap homemade option (picture hook + bending and filing). Not quite on-the-fly, but it works

http://img.tapatalk.com/d/14/01/30/naduve7u.jpg

I've actually got a set of those in a drawer somewhere that I had on my YZ. Wait a min, aren't YZ forks 45mm??

The determining factor would be the size of the hex head on the fork cap.

Right you are, my poor bike is in my freezing cold garage in tatters after the enduro Sunday, I'll get out there tomorrow and check out the fit when I clean my bike.