Lets clear up clutch crossover
Lots of conflicting info on here as to what will and won't work on the GG as far as clutch replacement. Mine is starting to slip and was looking at brands/crossover options. Why don't you post what you are running and how it work and any mods you had to do. This is very interesting, but adds to the confusion-
http://www.barnettclutches.com/searc...n=301-48-10001 From what I have read looks like the best bet is to get the 3mm plates (GG is 2.7mm) with a thinner thrust washer (1.5mm, supposedly one off a Kawasaki will work, would someone post the exact model?) to make up the difference as the 2.7mm aftermarket are prone to breaking. How is this working out for folks? |
Is it that hard to get GG plates in parts of the world? In the UK I just pick up the phone and any GG dealer has them.
|
Quote:
when you're in there, check the rivets for the cush drive on basket... i switched to bolts and have had no problems. |
Quote:
Its a whole lot easier to turn loose of $50 for an aftermarket than $325 for an OEM kit. |
Quote:
|
Quote:
|
Are you sure they are only 50 quid? If so I will get a set while I am back here! I cant believe something is actually cheaper in the uk!
|
Quote:
it was $44.99 for the whole deal. |
Quote:
I looked back at one of your earlier posts and you had a Suzuki part listed for the washer, but it seemed like the wrong one on the fiche. You had it listed as a 08211-22423 but looks like on the diagram a 09180-22045 is a closer match, is this correct? Can be seen at http://www.cheapcycleparts.com/model...emblies/115472 |
that washer 09180-22045 is 22.1x45x? 45mm o.d. is probably fine, but i can't find the thickness. if someone has a local friendly suzuki shop, you could probably stop by and measure it....
can't remember how i looked up that thrust washer... can you direct me to the old thread (can't seem to find it...) maybe it will refresh my memory. |
All times are GMT -5. The time now is 03:26 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org