Jetting for 2011 EC250 UK
Looking for a starting point for jetting on a 2011 ec250
38mm AS2 carb. I'm unsure on current jetting specs. Typical UK weather 6?c to 14?c. 0- 1000ft Thanks in advance. Looking for needle recommendation. Tight wooded trails with the a few hillclimbs. Thanks |
Hi Quigs,
have you had a look at the jetting thread? I am sure you will find useful information there as most members post their personal settings there. Good Luck Steve |
Hi Steve.
I been having a good look through the jetting threads etc. Looks like the NEDW suzuki needle could be a good starting point. Also recommended by jakobi. |
Just checked my specs now and 're as follow.
PJ 40 AS 3/4 OUT NEEDLE, N1EF 2ND CLIP MJ 178 |
Someone just posted a similar question, see it here...
http://www.gasgasrider.org/forum/showthread.php?t=23784 |
Thanks Dave.
Ordered the NEDW now |
Got the NEDW needle.
Thinking of starting at 42 pj, needle position 3, and a 178 mj |
Quote:
|
If you find clip 3 too rich,clip 2 too thin...options...
Necw is same taper,same diam,half clip pos leaner Necw#3 = Nedw#2.5 Was useful for the 200(Nech #3)but most 250s seem happy with Nedw#2 |
3 Attachment(s)
Quote:
You might find these tables useful that relate to the Suzuki NE** needles: Attachment 7989 Attachment 7990 Attachment 7991 |
All times are GMT -5. The time now is 06:55 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org