Clutch Basket Crossover
 

My clutch basket broke last weekend. I currently have a line on a used basket, but also want to look at all my options. Stock baskets are expensive and none in the US as far as I can tell.

Has anyone ever used a CR250 basket? I have heard rumors that they may work and was wondering if it was ture.

Thnks,

Ed

I would also like to know,, my 97 gg has some time on it and the knotches are worn deep...

off topic a little here, but does anyone know what other clutch plates (steels and fibres) will fit a 09 EC300R? Assume the R and std models have the same clutch

cr250 fibers will fit, but they are thicker than stock ones by at least .1 mm each.. i've not had a chance to get a set and mix and match and see if stack height is manageable..

thanks for that, apparantly the cr250 steels fit, have a set of them on the way so will post up when I know the answer

if you can make cr250 steels and fibers work together and end up with a manageable stack height, that would be awesome.

81 cr450 fibers are the same thickness, so are cb650 fibers

cr250 steels also fit, but need aftermarket ones as stock ones are ally

i ordered a cr250 clutch kit - plates and steels - we'll see how it goes.

I replaced my fiber and steel plates 2 years ago. I ordered a Barnet kit from Go.Fasters...seems to be working just fine. The basket looked really good for it's age...