Clutch Spring Torques
Hi there, just a quick question does anyone know the torque setting for the bolts that hold the clutch springs to the basket. I've had a look on the torque settings page but I can't find it, any help would be appreciated.
|
Lightly seating the bolts is all thats required. The preload from the springs acts like a lock washer preventing the bolt from backing out.
|
10Nm I believe. Quite light. It's in the engine rebuild manual - downloadable but only listed under one year I think. But the engines haven't really changed much.
In general sense check any torque setting you read in a GG manual. There's a general torque table on this site somewhere but it is a general and I'm sure good for general bolts but probably doesn't apply to any high tensile and or specialist stuff. |
Quote:
|
I'll never forget as it was a good laugh when someone called asking that and the guy working for me told em to tighten one till it breaks and the others not as much.
|
All times are GMT -5. The time now is 09:04 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org