Indicators don't flash
I would like to install only the 2 direction indicators in the front.
I connect all cabels, plugs and also the flash relais. But the bulbs don't flash they only shine permanantly. What can I do ? |
The flasher relay is set up for four bulbs. With only two bulbs, there's not enough resistance to make the flasher work.
|
OK when I simulate the 2 rear indicators with 2 resistance (5W/13V = 0,420A; 13V/0,42A = 31Ohm/5W) with appr. 33Ohm/5W it can work?
|
Yes, or you can try an LED flasher.
Most people just hook up bulbs and mount them out of sight. |
OK the flashing works with 33ohm/5W but a little bit to slow
may be try some 22ohm resistance |
All times are GMT -5. The time now is 04:51 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org