Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Engine 4 stroke (including EFI & Exhaust) (http://www.gasgasrider.org/forum/forumdisplay.php?f=45)
-   -   Slipping cluch (http://www.gasgasrider.org/forum/showthread.php?t=24512)

andrius7 06-07-2019 05:12 AM

Slipping cluch
 
Hi all, just fitted new set on my fse, after a half hour of riding it startas to slip on 4,5,6 gears

Anders 06-07-2019 05:17 AM

Quote:

Originally Posted by andrius7 (Post 190355)
Hi all, just fitted new set on my fse, after a half hour of riding it startas to slip on 4,5,6 gears

Did you check the spring lengths? Perhaps they are worn?

arminhammer 06-07-2019 05:57 AM

Too much fluid in the res.

andrius7 06-07-2019 08:40 AM

Į left old springs, new ones are too long, but į might be wrong

Gasser Nate 06-08-2019 02:00 AM

Were they genuine plates? Did you measure the thickness of them? Did you pre soak them in oil before fitting as well?

andrius7 06-08-2019 08:15 AM

OK, problem solved, just tighten 3 springs


All times are GMT -5. The time now is 07:57 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org