GasGas Riders Club Forum

GasGas Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Product Announcements (http://www.gasgasrider.org/forum/forumdisplay.php?f=44)
-   -   No More Rim Grease! (http://www.gasgasrider.org/forum/showthread.php?t=499)

Boomhauer 12-11-2006 08:07 PM

No More Rim Grease!
 
Any of you guys tried one of these yet?

http://www.pcracingusa.com/proseal.php

A few guys over on the KTM site swear by them and I think I am going to order one.

This would cure not having to use that nasty rim grease ever again.:cool:

gasgasman 12-11-2006 08:12 PM

Rim grease is "old school".
Last time I used rim grease was on my 1979 Yamaha IT 175.:cool:

Boomhauer 12-11-2006 09:09 PM

Quote:

Originally Posted by gasgasman (Post 2724)
I am old school!


Yep that explains it all.:D

cdn280 12-12-2006 08:01 AM

Which Honda model filter is used on the GG? The current CR125/250 ?
ahem.... grease here too.

eff 12-12-2006 12:08 PM

2000 cr250

motorhead 12-14-2006 01:59 AM

I too would like to toss the bel-ray waterproof grease tub.And I'm thinkin of trying the no-toil thing next year also.Does the 2000 honda cr250 neoprene gasket fit a 05 de300??Then the filter would too right?What about the mounting bolt hole?Thanks for your replies!

jlk_250 12-14-2006 07:31 AM

Quote:

Originally Posted by gasgasman (Post 2724)
Rim grease is "old school".
Last time I used rim grease was on my 1979 Yamaha IT 175.:cool:

I agree. Rim grease was useful when the filter cage/airbox designs were so bad that there might have been gaps there. I've been using Notoil for years and do not use rim grease even though it comes with their kit. IMO there is no point to rim grease other than tradition.

Jon
'01 XC300

Boomhauer 12-14-2006 08:09 AM

Quote:

Originally Posted by motorhead (Post 2760)
I too would like to toss the bel-ray waterproof grease tub.And I'm thinkin of trying the no-toil thing next year also.Does the 2000 honda cr250 neoprene gasket fit a 05 de300??Then the filter would too right?What about the mounting bolt hole?Thanks for your replies!

Me and a couple of my friends had bad luck with the No-Toil filters. After about 4 washes the filter was falling apart.:mad: I started using the ready filters from Cycle Gear and they work great except you have to buy a new one everytime you change out the filter.:mad: So now I have a UNI filter.

I use the 02-04 CR 250 filters in my 04 GG300 and they fit perfectly.:cool:

eff 12-14-2006 08:35 AM

Quote:

Originally Posted by Boomhauer (Post 2764)
I use the 02-04 CR 250 filters in my 04 GG300 and they fit perfectly.:cool:

I have a 00-01 CR250 filter and it fits fine too.

Nick 12-14-2006 02:57 PM

Moose has a filter with the seal built in.


All times are GMT -5. The time now is 12:13 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org