Misc Parts
 

Due to my current ride having a bearing failure I'm cleaning out some old spare parts I have to fund a bottom end rebuild.

All these parts came with my '05 DE250 when I bought it so I can't verify their condition 100% but I will provide any and all pictures required for a prospective buyer. I'm open to all reasonable offers.

What I have: (not all pictured)

EC250 matched engine cases w/case bolts - no damage that I can find
SOLD - EC250 cylinder w/powervalves - needs a replate but no scoring or gouges
SOLD - EC250 head
Right side engine cover w/water pump assembly
SOLD - Clutch cover
Powervalve governor
SOLD - Clutch basket assembly with inner/outer hubs, plates, and frictions - very minimal finger grooving
SOLD - Kick start lever
SOLD - Inner kick start assembly
Two complete used crankshafts - left one has Hot Rods rod - not sure what the right crank fits? - threads/splines on both are good
SOLD - 2k2 stator - no clue if it works
Various transmission gears and shafts
SOLD - LT-Racing powervalve cover
Stock reed cage
Early GG chrome frame
Swingarm
Early magnesium stator cover - good size crack at lowest mounting bolt
and other misc internal parts

Some pics:


http://i5.photobucket.com/albums/y18...424_085219.jpg
http://i5.photobucket.com/albums/y18...424_085935.jpg
http://i5.photobucket.com/albums/y18...424_090126.jpg
http://i5.photobucket.com/albums/y18...424_091003.jpg
http://i5.photobucket.com/albums/y18...424_091339.jpg
http://i5.photobucket.com/albums/y18...424_091502.jpg

Interested in the clutch basket and cover

How much for both?

Say $120 for both plus shipping.

PM me your email for Paypal. Shipping would be to 98092 (Auburn, WA)

Just to make sure I'm getting this right, you want the clutch assembly as pictured and the round clutch cover, correct?

PM Sent on Power valve cover & other parts

Correct, you have a PayPal incoming.

thanks

Replied to PM on PV, PV cover, Cyl, & Head

Can you measure the piston on the crank that has the splined end on the primary gear side. My gut is telling me it's either from a 125 or a 200. If it's for a 200 id be interested in it.

Parts received. Thanks