Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Engine 4 stroke (including EFI & Exhaust) (http://www.gasgasrider.org/forum/forumdisplay.php?f=45)
-   -   Valve Help (http://www.gasgasrider.org/forum/showthread.php?t=783)

bxb 03-06-2007 03:45 AM

Valve Help
 
Hi everyone, need some assistance with a valve check on an 06 pampera 400.
Can't seem to find the valve clearance figures or cam journal torque figures.
Doing the job is no problem, I just need the data. If someone can supply or point me in the right direction on the web I would able to do the job right and not have to worry about seizing the cam because I was too ham fisted on the torque wrench.



Two simple rules for dirt riding,
Right hand down, try not to die.

Sandman 03-06-2007 04:25 AM

Inlet 6thou Exhaust 10thou , cam caps 10Nm
Put lots of oil on the caps before you put them back on

bxb 03-06-2007 05:31 AM

Thanks mate, do you have a manual and if so, how did you get it.


All times are GMT -5. The time now is 04:48 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org