NEED Help with starter
2018ec300 starter worked perfectly till about 75 hours and was still working perfectly until it hung engaged and burned up the relay/solenoid. I've put on a new starter motor, solenoid, and starter button. I can jumper across the solenoid and the starter turns fine but not even a click when I try a start with the button. That only leaves the diode module and the wiring. How do I check the diode and where can I get one?
|
The small red wire at the starter solenoid provides the 12v from the start button.
I would check that circuit next. |
All times are GMT -5. The time now is 08:59 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org