Chinese rads
 

Hi all

Has anyone tried the Chinese rads that are on ebay , I need some for my 12 and they are less than half the price of oem ones , any opinions on them would be appreciated .

Chris

I have had a set in my 08 300 for two years and a pair on a mates 08 450 for one year with no problems. Both sets are from GPI. On the 450 he is also running their silicon hoses again with no problems.

Thanks for the reply pal

I've installed a couple of them in my EC 250 2008 for more than a year, so far no problem.

OEM:

http://i1373.photobucket.com/albums/...psf68570a6.jpg

Chinese Rads:

http://i1373.photobucket.com/albums/...psb7d9307f.jpg

I ended up buying a set for my 12' 300. They are doing the job well. The oem cap didn't not fit and the one it came with was 1.1 bar. I found that a cap from a 13' KX450F will fit, you can find those in a 1.8 bar.

Cheers for the info guys ,

Did you get the ones listed as 12/13 rads , for some reason they cost more and I'm sure I read on here somewhere the 11 and 12 rads are the same

I installed some on my 12 but had to modify both sides of each radiator brace as the chinese rads are wider and deeper.
All good so far , touch wood.
Cheers Mark

ebay. .Link? ?

Sent from my GT-I9300 using Tapatalk