Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Chassis & Body (http://www.gasgasrider.org/forum/forumdisplay.php?f=20)
-   -   Fork Guards (http://www.gasgasrider.org/forum/showthread.php?t=7690)

PEB 08-02-2010 04:18 PM

Fork Guards
 
Will any of the newer wrap around fork guards fit the 50mm zokes on my bike. I use the same ones as the smaller forks but seem to rip one off every couple rides seems like the warp around design might help with that.

gasgasman 08-02-2010 05:07 PM

I don't think they will fit the 50mm forks.

The OEM guards that came on mine were rubbing the fork tubes pretty bad.
I had to go with the Husky 50mm fork guards.

gasser 08-03-2010 12:04 PM

I just put the new wrap around guards on my 07 gasser(standard zooks) and they are a much beefier design than the original. Only cost about $30 from GoFasters.


All times are GMT -5. The time now is 12:06 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org