Rieju MR300
 

Friends, because There is not a lot of information on the motorcycle on the network, I want to share useful information from myself ...
I found out from the pictures on the Internet that the resonator on the Rieju is the same as on the Gas Gas GP Enduro from the 18th. Accordingly, the protection of the P-Tech resonator is suitable for a bolt-on from this model - bought and installed. (Not suitable from EC300, different resonator).
Also, a fan normally stands up to protect the radiator from P-Tech, but you need to cut the cooling hose in order to slightly move it with the thermostat to the left. A fan kit came up with a sensor from Beta - the sensor cuts into the cooling hose, all this is connected from the battery through a fuse and a shutdown relay with a 10-15 sec delay. I hope it will be useful to the owners.
English is not my first language, so I apologize for any possible spelling mistakes.
https://i.ibb.co/hVBp3CJ/P-20201025-...-HDR-On-HP.jpg
https://i.ibb.co/FWRT71G/P-20201025-...-HDR-On-HP.jpg
https://i.ibb.co/7pRG0sP/P-20201025-...-HDR-On-HP.jpg
https://i.ibb.co/MMwNHy5/P-20201025-...-HDR-On-HP.jpg
https://i.ibb.co/4ZCRK1P/P-20201025-...-HDR-On-HP.jpg
https://i.ibb.co/zrHgwz2/P-20201025-...-HDR-On-HP.jpg
https://i.ibb.co/khbqYj4/P-20201025-...-HDR-On-HP.jpg
https://i.ibb.co/GHMP2cq/P-20201025-...-HDR-On-HP.jpg

Nice looking bike.;)

Good looking bike, How long did it take for delivery,how much did it cost?

The motorcycle was available. The cost for the course was approximately $ 7500

Good Price
 

That?s very reasonable, thanks for responding!:D