Rieju & GasGas Legacy Riders Club Forum - 2012 ec300 fork and shock springs needed (heavy)

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)

- Parts (http://www.gasgasrider.org/forum/forumdisplay.php?f=58)

- - 2012 ec300 fork and shock springs needed (heavy) (http://www.gasgasrider.org/forum/showthread.php?t=23563)

Iceracer

05-14-2018 02:23 AM

2012 ec300 fork and shock springs needed (heavy)

Having troubles finding these. I'm in the 230lb ballpark..

Thanks!

memphis2857

05-14-2018 07:03 PM

Matto Cycle or Halls Cycles will ya e what you need

Sent from my iPhone using Tapatalk

Zman	05-14-2018 07:20 PM

What is the length and inside diameter of your present spring. I just upgraded mine as I grew a few pounds since I set it up for my previous weight at 240.

Tim

Iceracer

05-14-2018 11:24 PM

Quote:

Originally Posted by memphis2857 (Post 183168)

Matto Cycle or Halls Cycles will ya e what you need

Sent from my iPhone using Tapatalk

Ill check with them.
Thanks!

Iceracer

05-14-2018 11:25 PM

Quote:

Originally Posted by Zman (Post 183169)

What is the length and inside diameter of your present spring. I just upgraded mine as I grew a few pounds since I set it up for my previous weight at 240.

Tim

Not sure? Havent taken the shock off yet..
Will be pulling it off after this weekends ride..

Zman	05-15-2018 01:30 PM

The length is not as critical as the ID. As I recall the ID of my spring for my Ohlins shock is about 2.25".

The spring I have came from MX Tech and the rate was set for a 240lbs,B enduro rider. My backpack must have gained weight or maybe my new boots are heavier. :D

All times are GMT -5. The time now is 06:42 PM.