renthal double wall
So my six days came through wtih a set of these bars. don't know if I dig the bend but I'll give them a go. What are you guys using for barkbuster attachments that double wall part looks pretty fat. any other opinion on these bars
|
Enduro Engineering makes a bar clamp specifically for this bar, or you can use the Fastway / Bonz method of attaching to the center bar mount on the triple clamp.
|
I will trade you a set of the 06 bars with heated grips if you want to give them up.
|
Quote:
|
Ron I was wondering about that cross bar ... I'll run the moose BB
einstein ... I have several sets of 06 bars ... but If I don't dig the renthals I may take you up on that. |
i called renthal and asked them about the cross bar and as long as there twinwalls they said they are more than strong enough. just not on a standard renthal bar
|
I didn't like the bend at all. I Couldn't find good setup anyway. I bought "orange bike" high model Twinwall and shortened it about 1/2 inch. (I had same bend but fatbar in my old -07)
|
what do you guys do with the little plastic "door" they have screwed to the bottom air box drain?? When I saw that I thought it would do a great job keeping water out and an even better job of keeping it in the air box. This was verified when I pulled the air filter out after washing my bike and saw a nice little puddle of water still in there. Do you leave it as is, stick something in there to wedge it open a bit so it will drain, or just remove it all together??
|
My plane-jane ec300 just has a square hole? But then I am blind even with the glasses :)
|
All times are GMT -5. The time now is 10:49 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org