Gas gas ec 300 cooling fan
 

Anyone fitted one? If so what's my options? Thanks.

There is a thread somewhere on this.:confused:

I fitted a GG trials fan to mine with a manually operated switch, but I believe GG now sells an ec kit

I did this fan.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

It's the same one trail tech uses for their kits. I also ordered the temp sensor and temp controller from trail tech.

Here's a pic

http://i267.photobucket.com/albums/i...44DDF870B2.jpg

I had to make a bracket to mount the controller. It might be easier to just buy a KTM kit and modify it to fit. But I guess if GasGas has a kit that would be the easiest route. I couldn't find anything a few years ago when I was looking at doing mine.

Thanks for the replies! Have you more details or pics on how you mounted the fan mate? Thanks

I just used rubber washers between the fan and the radiator. Then I slid zip ties through the fins. Then on the other side used another rubber washer backed by a steel washer, then cut the head off another zip tie and zipped it on the end to hold it all together.

Similar idea to this.

http://www.amazon.com/gp/aw/d/B000CJ...2BL&ref=plSrch

I'm not clever enough to mount a fan so cheated using a heat sink

http://uploads.tapatalk-cdn.com/2016...454cc35177.jpg

http://uploads.tapatalk-cdn.com/2016...168ed22b45.jpg

That's pretty spendy! 275! I think it would be better to just buy the trail tech kit for a Ktm or Honda and modify it too work. I think those are about 125 and come with the digital temp controller.

I only purchased the fan and rectifier and use a manual switch. I know that I paid less than the KTM fan kit price at the time