Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Parts (http://www.gasgasrider.org/forum/forumdisplay.php?f=58)
-   -   2011 EC300e part out (http://www.gasgasrider.org/forum/showthread.php?t=22415)

Mick 02-23-2017 04:02 AM

2011 EC300e part out
 
Bike has 270 hours on it.


Parts are sold as first come first serve basis.

All prices do not include shipping. Prices not written in stone, hopefully they seem reasonable. May of forgotten a couple things.

I will keep the list up and update it so you guys can see what is left.

My last part out, I under estimated some of the shipping cost, larger items I will take to Fedex to get an exact quote.

Sold AS-IS

SOLD Engine minus e-start assembly, ran great when I parked it, needs counter shaft, may need an over haul.

SOLD E-start assembly, w/wiring harness, switches, gear, covers, etc.

CDI
$100

SOLD Pipe OEM. Dented but repairable
$75

SOLD FMF-Q. Hole wore in side from side panel rubber spacer repaired with aluminum stock/jb weld. Not pretty but it works...repair hidden by side panel.
$75

SOLD Marzocchi 45mm forks (stock)
$385

SOLD Ohlins 888 rear shock (stock)
$225

SOLD Triple Clamps 45mm

SOLD Scott's stabilizer frame bracket bolton for top mount, with Fastway 1 1/8th" topmount barclamp w/hand guard combo.
$175

Front wheel with fresh bearings, typical dings and scratches. Also extra brand new in package All Balls bearing kit.
$175

SOLD Rear wheel with fresh bearings, comes with disc and Supersprox 48 (worn), typical dings and scratches
$175

SOLD Front Axle

Have 2 rear axles
$25 each

SOLD All plastics/headlight

SOLD OEM Radiators, both crashed but repaired by Mylers


SOLD Plastic Frame Guards
$10

Front Brake caliper, master cylinder/lever, hose (no banjo bolt for the master cylinder or bracket for the fork, they were sold)
$130

Rear Brake Caliper & Hose (No pedal or MC)
$80

SOLD Magura Master Cylinder Clutch complete assembly
$165

AJP Clutch Master Cylinder (needs new seals)
$60

OEM Tank with Cap (no Petcock), leaked from cap when new
$50

SOLD Clarke 3.2 Gallon tank
$75

SOLD Carb Keihin 36mm


SOLD Subframe w/battery tray, a bit tweaked but usable
$150

SOLD Frame with street legal title, new kickstand/chain roller tab welded on.
$400

SOLD Swingarm, with TM chain slider


SOLD BRP Chain Guide (rear) worn still has some life in it


SOLD IMS Stainless Foot Pegs
$75

SOLD Airbox
$30

SOLD Full Linkage
$100

SOLD TwinAir Air Filters (2) used
$5 each

SOLD OEM Bar Mounts
$10

Rad/Engine hoses
$10

SOLD Kickstand w/Enduro Engineering wide foot. Front brake bracket


SOLD Seat, small tear at the bottom towards the tank
$50


Picture of bike right before I parked it.

https://scontent-sea1-1.xx.fbcdn.net...18&oe=593E9C65

pj7 02-23-2017 07:44 AM

Can I get a price on all the plastic, plus the headlight, but not the frame protectors shipped to Georgia 31602?

Mick 02-23-2017 08:06 AM

Quote:

Originally Posted by pj7 (Post 174906)
Can I get a price on all the plastic, plus the headlight, but not the frame protectors shipped to Georgia 31602?

I can do $115 shipped. Shrouds are a little beat up...left side had one of the bolt holes pull through, use a KTM chain slider washer to hold it to the tank.

https://scontent-sea1-1.xx.fbcdn.net...9f&oe=594AA53Dhttps://scontent-sea1-1.xx.fbcdn.net...e0&oe=59252A7E

pj7 02-23-2017 09:01 AM

Thanks - sent you a PM

Jacob 'Berg 02-23-2017 12:53 PM

I would like the headlight, if it is not sold.

Mick 02-23-2017 01:47 PM

Quote:

Originally Posted by Jacob 'Berg (Post 174915)
I would like the headlight, if it is not sold.

Sorry already sold, went with all the plastics.

frankinberg 02-23-2017 03:50 PM

Is the swing arm in good shape

Mick 02-23-2017 03:56 PM

Quote:

Originally Posted by frankinberg (Post 174920)
Is the swing arm in good shape

Not in bad shape, typical scratches, I'll get some pictures of it when I get home from work for you.

hamilton 02-23-2017 05:32 PM

I'll take the chain guide. Sent you a PM.

frankinberg 02-23-2017 07:25 PM

How about swing arm and carb 300.00 plus shipping to 80602 pay with paypal


All times are GMT -5. The time now is 08:03 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org