300 Crank ?
Anyone know of or recommend a complete crank to buy?
|
You will pay through the nose for a new OEM crank, if you can find one. I would consider having your crank re-built, if possible.
I would try Hall's or Motocenter and see what the cost and lead time are. Good luck! |
What year is the bike?
|
Its an 09 engine that I want to redo since I have gear issue . This is going into my 18 before it blows up (the 18) hopefully. I was just hoping to find a wrench rabbit kit etc.
|
|
Just curious why you would not re-build the 2018 motor? Do you plan on changing the mounts on the 2018 frame to accommodate the 2009 motor?
|
Shite !
that ruins my plans . I didn't know the cases were different from 09 to now. I just want to do a quick swap so my bike isnt sidelined. I had no idea the cases had changed since the middle years. I thought they only changed 03-04ish
|
Someone may correct me, but I believe the frame/motor mount design has changed at least three times since 09. 10-11', 12'-17' (may be a change somewhere in this time period as well) and the newest design 18'-present (rieju).
I would start cross referencing parts and see what can be used from the '09 motor. You could use the 09 as a donor motor, which may help with costs and downtime for the rebuild on the '18. |
A quick check of center case gasket part numbers should tell you if the mounts are in the same spots.
|
Center case gasket part #:
2009- ME120144001 2011- ME250544001 2012- ME90000013012 2018- ME94000GG-CLJ-1 |
All times are GMT -5. The time now is 01:06 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org