Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Electrical & Wiring (http://www.gasgasrider.org/forum/forumdisplay.php?f=19)
-   -   LED Headlight- anyone try one of these on a Gasser? (http://www.gasgasrider.org/forum/showthread.php?t=18184)

Kyle01 09-15-2014 07:22 AM

LED Headlight- anyone try one of these on a Gasser?
 
http://www.cyclopsadventuresports.co...ulb-_p_83.html

I've got one in my husky and it's awesome. 3000 lumens, draws less than a stock bulb, waterproof and fan cooled. For the price I don't know how you can beat it. And the beam pattern is awesome, at least in my husky.

VxZeroKnots 09-15-2014 09:31 PM

I hadn't yet but was planning on doing so soon. advmonster also has their own version.

gasgasman 09-15-2014 09:45 PM

I have on on my 2011 GG. Wicked bright.
No issues at all with the fan getting fouled with dust or dirt.

Gaser22 09-15-2014 11:06 PM

Which bulb did you use gasgasman? I have a 2011 300ec and would like to upgrade my lighting. Is it a plug and go bulb? Thanks

Kyle01 09-17-2014 08:44 PM

The cyclops comes with 3 different bases and yes, it's plug and play. Another benefit besides less draw and 5x more light- vibration and waterproof! They claim 10x the life of a halogen bulb.

gasgasman 09-18-2014 09:31 PM

Quote:

Originally Posted by Gaser22 (Post 140696)
Which bulb did you use gasgasman? I have a 2011 300ec and would like to upgrade my lighting. Is it a plug and go bulb? Thanks

Installation is simple.
I went with the H4 kit and the rectifier . I wired mine on the low beam connectors.

The wiring butt connectors are junk. You will need to get some heat shrink butt connectors.

davedunaway 09-19-2014 10:14 AM

I have the 2k2 ignition on my bike. I believe it's only 35 watts. Is this enough to run this system?

Dave

gasgasman 09-19-2014 03:00 PM

Yes. Requires very little watts. Mine lights while kicking the motor over.

desertgasser300 09-21-2014 07:31 PM

Quote:

Originally Posted by gasgasman (Post 140824)
Installation is simple.
I went with the H4 kit and the rectifier . I wired mine on the low beam connectors.

The wiring butt connectors are junk. You will need to get some heat shrink butt connectors.

Dont the gassers already come with a rectifier?

gasgasman 09-21-2014 07:53 PM

It's a voltage regulator, not rectifier.



I guess you don't need the rectifier, according to Cyclops on the KtmTalk discussion


All times are GMT -5. The time now is 01:22 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org