Shift Lever
 

anyone try one of these yet?

http://cgi.ebay.com/ebaymotors/TMV-S...Q5fAccessories

Yes great lever better then the standard lever had to die grind the tip a little to stop it rubing on the case but is a good product thanks andrew

i was looking at this one also - thanks - seller said it's the same dimensions as stock - is it?

Hammerhead
 

I almost went with the one you posted, but went with a Hamerhead because I wanted a longer offset to fit my boot. The tips are also replaceable so you don't have to buy a whole new lever.
http://www.hdmoto.com/ProductDetails...ctCode=GGTMSLR
I wouldn't reccomend the rubber tip, it wears out pretty fast.
http://www.hdmoto.com/v/vspfiles/photos/GGTMSLR-2T.jpg

i received the tmv one. it's about 15mm longer and sticks outboard about 15mm more than the stock one.. definitely way better than the original one.

brake lever
 

Did these folks have a Gas Gas specific spline?

not sure what else the spline fits, but the tmv are splined perfectly to fit gas gas. no issues..