Rieju & GasGas Legacy Riders Club Forum - FSE Coil-on-plug ohm readouts?

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)

- Enduro Engine 4 stroke (including EFI & Exhaust) (http://www.gasgasrider.org/forum/forumdisplay.php?f=45)

- - FSE Coil-on-plug ohm readouts? (http://www.gasgasrider.org/forum/showthread.php?t=3158)

bergerhag

08-14-2008 05:58 AM

FSE Coil-on-plug ohm readouts?

Has anyone got the specs for the primary and the secondary windings on the coil-on-plug assembly for the FSE?

Mine has probably gone bad, and it seems my supplier sent me another bad unit.

Disco_STu

10-20-2008 03:05 AM

Hello,
If your 450 is a late model it probably has a Magneti Marelli BAE700 Coil on plug ignition coil. The primary resistance is 0.65 ohms and the secondry is 8.7k ohms.
Looking at the connector on the coil the pin numbering goes from the right to the left. the primary coil is across pins 1 & 3 and the secondry is across 2 and the plug connection.

Stu

All times are GMT -5. The time now is 04:26 AM.