Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Electrical & Wiring (http://www.gasgasrider.org/forum/forumdisplay.php?f=19)
-   -   2012 starter gear how much !!!!! (http://www.gasgasrider.org/forum/showthread.php?t=18361)

Watty 10-09-2014 06:50 AM

2012 starter gear how much !!!!!
 
Wow my starter sprocket that sits on the flywheel decided to break last weekend , quick call to gas gas uk and they are trying to relieve me of nearly ?200 just for the sprocket :eek: are they mad , does anyone know if there are any cross over parts from another bike that i can buy or am i just kicking it from now on ??

No company can justify charging that for a gear cog its about 50p worth of metal :rolleyes:

earlystock 10-13-2014 01:30 PM

I haven't had this problem yet knock on wood, but maybe check with a machinist shop, probably cost a fair amount depending on the shop and equipment they use, but I doubt it would be $200 in my experience. I had some yamaha hubs turned to accept bearings for my old ktm 620 and I think I only paid $50 for both hubs, but I am also a farmer so they see me more often then I care to admit :rolleyes:lol.

Boom Boom 10-13-2014 02:41 PM

Do a search for posts by BobT on here.
His 2011 failed and he found other parts that worked for much less and done a post about it here.

stuart 10-14-2014 04:54 PM

this bit ?

http://www.motocrosscenter.com/ecomm...ducts_id=36074

krolik_21 11-22-2014 01:43 PM

Hi. Look heere total modification cost for all about 100
http://www.gasgasrider.org/forum/showthread.php?t=18583


All times are GMT -5. The time now is 12:53 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org