Stator wires
 

Hello,

Ec300 2007 stator.

Sorting out the wiring on the rebuild and I've no idea where the white wire goes !! Could someone enlighten me please.

Sorry about the size of picture, another thing I don't know is how to make it smaller.

cheers Bill

https://oi29.photobucket.com/albums/...psvx82vkcp.jpg

Assuming your bike uses AC power for everything, the stator white wire is not used. Your working voltage will be ~14VAC between yellow and engine ground. There is a small black regulator that clips AC voltage so you don't blow out bulbs.

The white wire has higher voltage that would supply a regulator/rectifier for creating DC voltage (primarily for battery charging).

Hello,

Thank you for the explanation;)