Which year/model Jap bike uses same '06 EC300
 

....front brake?

I FINALLY found Moose Racing supplies NISSIN Master Cyl kits, but shows no listing for GG. But it DOES show _hitloads of listings for same-vintage Jap bikes as my '06 EC300. Anybody know which Jap bikes use the same Nissin brakes?

My sons' bikes both use the sme brake pads, so I recon the caliper is also the same. They are a 2000 or thereabouts DRZ400S and a 2007 RM125.

Sent from my OMNIA7 using Board Express

KDX200 from 95 onwards have the same pads too, BUT the master cylinder on my 2007 GG is definitely a slightly different shape. I haven't pulled either apart to know what's different internally though sorry.

Oops! Didn't really notice that it was the master cylinder you asked about.
In that case I am not really sure, but would presume the aforementioned Suzukis also use the same parts there.

Sent from my OMNIA7 using Board Express

2002 CR250 brake lever fits my master (2002 XC300), but a 2002 YZ426 lever does not. I would look at which lever crosses over and go with that kit. Where have you found the kit? What is their return policy? If it's less than $25, what's the worst that can happen?

Moose Racing sells rebuild kits, and the PICTURE of the 0617-0018 kit that fits CR250R 2000-2007 (plus a bunch of other Hondas from that same era) LOOKS exactly like my parts. Figures that NOWHERE can I find the DIAMETER specs of the MC, but like you said, what's $25....

I'll let everyone know if it fits.

my old 94 cr500 has the same caliper as my gg, some kx's have the same