Crank Remover and Crank Installer tools for EC250
Can anybody please point me to some good Crank Remover/installer tools that works with Gas Gas 2 strokes?
|
Tusk (rmatv) sells one, however I never required one when I did my bottom end. The cases split easy enough (once all the bolts are out). If the crank doesn't come out a few taps with a plastic/rubber mallet moves it easy enough. For installation I simply froze the crank with some dry ice and it dropped right in.
|
I didn't have to use any install tools, are you having issues? I know that motion Pro makes a very nice press and puller, they are affordable and pretty stout. But, again, I haven't had any issues installing a crank into the bearings if you freeze everything before installation.
|
Quote:
Thanks for the tips. |
Check out Jakobi's rebuild thread here, he sorted everything out pretty well (two or three times in places :D).
|
True that! That was my first ever bottom end. Learnt a few things.. Next one will be a walk in the park.
|
All times are GMT -5. The time now is 10:03 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org