Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Engine 4 stroke (including EFI & Exhaust) (http://www.gasgasrider.org/forum/forumdisplay.php?f=45)
-   -   450FSR 2008 Valves and ignition (http://www.gasgasrider.org/forum/showthread.php?t=20471)

Victory6541 11-08-2015 03:23 PM

450FSR 2008 Valves and ignition
 
Hey ppl!

I'm having trubble finding the right valve adjustment setup. How to place the exhaust and intake camshafts.

Also another issue were the bike runs smooth while idle. But as soon as you turn the throttle abit it wants to die any idea what it could be?

Regards Jocke a typical sweed

Leeky 11-15-2015 01:37 PM

Hi, do you have a copy of the workshop manual? I googled it and found one. Follow the pics and ensure you get the arrows on the cams pointing to the correct pin (left pin on the link for the exhaust cam on my 04 engine from memory and then count the 15 pins back to the inlet arrow) this sets the cam to crank relationship.

If you get this wrong (like I did initially) it will run but is terrible to start and won't pickup properly, it also kept cutting out on idle.

redvan 03-11-2016 01:29 PM

Hello, i am from spain.

Where can i buy the electrical diagram of fse450 2009?

I looking for it and i havent found it. I am deses?rate....

Thank you!!!


All times are GMT -5. The time now is 07:37 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org