powervalve spacer clearance
 

I have a Christini AWD with 2015 300 engine and E start in it.
I wanted to try the power valve spacer. How wide are they?
It looks like it be very close to hitting the starter if it were spaced out more than a half inch or so.
Do they fit the newer engines with E start?
Thanks.

I don't believe that they fit the newer e start models. You might be able to get a thin one machined to fit but it might not make much of a difference.

Sent from my Moto G (4) using Tapatalk

You can always bump your ignition timing a few degrees for free. That will give you more bottom end and midrange. Listen for knock just in case but I have not had a problem with this on any of my bikes.

I have the spacer sold from motocrosscenter in my 2015 300 e start and it fits just fine.No problem with the starter at all.

Spiros, the '15 has an adjustable PV Have you adjusted this first before installing the spacer?

Yes I have adjusted the pv.I have turned the screw from 2 turns out (standard) to 2,5 turns out because I want a more aggressive throttle response (like my 06 300 had :D )
Apart from that the spacer will benefit you in low revs whatever setting you choose for the pv.

So the spacer from checkpoint offroad DOES fit the 2015 300 engine with the e start. BARLEY!!! But it does!
Noticed absolutely no difference in power at all.