GasGas Riders Club Forum

GasGas Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Trials Engine (http://www.gasgasrider.org/forum/forumdisplay.php?f=73)
-   -   Jxt 200 piston & rings (http://www.gasgasrider.org/forum/showthread.php?t=23198)

stagjim 12-28-2017 04:51 AM

Jxt 200 piston & rings
 
Hi, have a questions regards my JXT 200, its a 1997 and yes its getting on but still a load of fun. Bought 3 months ago here in France, bought it for a green laning/ low level trialing.The engine starts 1st kick and runs well but has some top end noise, low compression and a bit of piston slap. So needs a top end rebuild. My problem is trying to source piston and rings, firstly i havent stripped yet to see if its an A or B piston, secondly been told by Gas Gas they no longer make them. Any ideas where i could get hold of the above. Or does anyone know if any of the newer models would fit.

stagjim 12-28-2017 05:10 AM

Sorry should have put on post the chassis no is VTRGG169706970310

(F5) 12-28-2017 01:01 PM

You'll just have to try new old stock somewhere if you can find part number. My 2000 TXT was a bit noisy, a new kit quietened it down a little for about a week and went back to rattling despite measuring real tight.

stagjim 12-30-2017 10:07 AM

piston and rings
 
Oh well that was useful, would appear no one has any or knows of any new or old stock. will ride it til it breaks and move it on

cbutler 12-30-2017 10:20 AM

Call Jim Snell he is no longer a gasgas dealer but still has tuns of parts.

http://trialspartsusa.com/


All times are GMT -5. The time now is 05:12 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org