2013 250 top end - about 4 hours total
 

I have a complete 2013 top end(cylinder, piston kit, head) with about 4 hours since new - going to a complete 300 top end. Will need a gasket set and you are good to go!
$400 + postage

PS>> My 300 top end should be here around the 20th and will be shipped then via UPS

SOLD!!

Lower Price
 

$400 for a complete top end minus gaskets!

interested on the 300 where about are you ??

I think he is converting from a 250 to a 300 so he is selling the 250 top end.

Sorry for the misunderstanding... The top end is a 250 that I am selling. Changing to a PS3 300 top end.

Too bad it won't fit a 200 crank

Actually the 250 and 300 cylinders will bolt on but the cylinder is about 0.2" taller and the piston sits too far down. You can do a big bore kit on the 200 to make them a 237cc.

buy a 250 bottom end and you are good!

Offers...?
 

Any offers? Keep in mind the complete top end is almost new - the entire bike only has lees than a tank of gas through it!

Top end
 

How about 300.00 plus shipping to 80602