2K2 Picture
 

Can anyone post a picture of a 2K2 ignition with the flywheel off. I swapped ignitions and now I am trying to put the 2K2 back on and something doesn't seem right. Serves me right to wait a month after I took it off. I took a picture of it but with the flywheel on, doh! Thanks,

Does the pic need to be of it on the bike? If not, I have one laying around and could send you a pic

Paul B

Here is a 2K2 when it was still mounted to the flywheel on my 2002 XC300.
Jeff

Stupid me. :eek: You need it with the flywheel off. Sorry for not re-reading
your post first.
Jef.....:(

Yes on the bike would be preferred. Thanks,

2k picks
 

l\hope this helps

oops WideBear. You did it too. He wanted to see it without
the flywheel mounted......
I did not take a picture of mine when I took it off to replace it
with the 2K3. sorry.
Jeff

Yes jeff I realized my mistake after posting. What I fail to understand is what he hopes to see that he cant see in the two pictures.They show the location of the pickup, harness and mounting points on the stator plate all relative to the case. Maybee Claude will enlighten us soon?

Thanks for the pics but what I need to know is...
How many bolts are holding the stator plate to the cases? My 2K3 had 3 but it looks like on the 2K2 only 2 will work. Is this right?

Also does anyone have a wiring schematic for the '07 DE300 with the 2K2 . All I have is the EC 2K3 and there are a lot less wires and I want to be sure I have them right.