EC125 2007 jetting
Hi, does anyone knows any base jetting for an EC125 2007?
|
have you checked the jetting database Sticky?
|
I did not see a 125 listed in Matt R's sticky of the jetting database.
With the '01 XC125 we had at the shop: AS1 Keihin N1EF needle with the clip in the third position 40 pilot 180 main jet This was before I learned a lot of the info about the jetting that I now know, but it worked pretty well. The bike was super sensitive about the jet needle and which groove the clip was in. Just a shade too lean and it had no bottom end power. One groove on the needle made all the difference when riding the bike in the mountains. It went from a nightmare ride to a rocketship with good low/mid-range torque. . |
Thanks for the replies! Finally, i contacted local GG and they suggested me as stock jetting:
Needle: NOZI (position 3) Main Jet:180 Pilot: 45 Air Screw: 1.5 turn Throttle Valve: 7 EC 125 2007 wears a Keihin 38 PWK. |
Large squish and low compression make them difficult to jet.
|
All times are GMT -5. The time now is 01:10 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org